KODAK ESP Office 2100 Series All-in-One Printers — Extended User Guide


Table of Contents > Handling Paper > Loading paper

4 Handling Paper

Loading paper

To load paper:

  1. Open and lift the paper input tray.

  2. Pull out the paper output tray and the extender until they are fully extended.

Loading plain paper

The capacity of the paper input tray is 150 sheets of plain paper.

To load plain paper:

  1. Fan and stack the paper.



  2. Make sure the left and right paper-edge guides are in the far left and far right positions, then insert the paper into the input tray.

  3. Move the paper-edge guides until they touch the paper.



Loading photo paper

The capacity of the paper input tray is 20 sheets of photo paper.

To load photo paper:

  1. Remove any paper from the input tray.

  2. Insert the photo paper (short side first) into the center of the input tray with the logo side toward the tray and the glossy side toward you.

    IMPORTANT: Always load the paper short side first . The printer automatically detects the orientation of the picture, whether it's portrait or landscape, and prints accordingly. If the photo paper is loaded in the wrong direction, the image will be cut off and the paper may jam. If the paper is loaded with the wrong side up, the image quality will be affected.

  3. Move the paper-edge guides until they touch the paper.



Loading envelopes

The capacity of the paper input tray is 20 envelopes.

IMPORTANT: Do not load envelopes with cutout or clear windows.

To load envelopes:

  1. Remove any paper from the input tray.

  2. Insert the envelope(s) into the tray with the with the flap side toward the tray and the top of the envelope against the right side of the tray.

  3. Move the paper-edge guides until they touch the envelope(s).





Previous Next