KODAK ESP Office 2100 Series All-in-One Printers — Extended User Guide


Table of Contents > Copying > Copying a photo

7 Copying

Copying a photo

You can copy a photo using the default settings, or you can make adjustments to the quantity, size, quality, and brightness of your copies.

Using the default settings to copy a photo

The default settings are either the factory default settings (see Resetting factory defaults), or defaults that you have set on the printer (see the bottom of the table under Adjusting the settings and copying a photo).

To copy a photo using the current default settings:

  1. Lift the scanner lid, and place the original photo face down in the right front corner of the scanner glass.



    IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).

  2. Close the scanner lid.

  3. Press Home.

  4. Press to select Copy Photo.

  5. Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.

Adjusting the settings and copying a photo

To copy a photo using settings other than the default settings:

  1. Lift the scanner lid, and place the original photo face down in the right front corner of the scanner glass.



    IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).

  2. Close the scanner lid.

  3. Press Home.

  4. Press to select Copy Photo, then press OK.

  5. Press to select an option, then press or to change the setting.

    Copy Photo Option Settings Description

    Quantity

    1 (default) to 99

    The number of copies that print.

    Copy Size

    2 x 3

    3.5 x 5

    4 x 6 (default)

    4 x 7

    4 x 8

    5 x 7

    4 x 12

    8 x 10

    8.5 x 11 or A4

    The printer enlarges or reduces the original to make it the copy size you select.

    If the selected copy size is smaller than the paper in the paper tray, the printer automatically arranges the pictures to best fit the paper size.

    Some cropping may occur if the image size and the selected print size are different.

    Plain Paper Quality

    Normal (default)

    Good quality output; prints faster than Best.

    Best

    The highest quality, but the slowest print speed.

    Draft

    The fastest print speed, but the lowest quality.

    Photo Paper Quality

    Automatic (default)

    The printer detects photo paper in the paper tray and sets Best quality automatically.

    Brightness

    Normal, -3 to +3 (Normal is default)

    Lightens or darkens the copy. Normal is no change from the original; -3 is the darkest; +3 is the lightest.

    Preview

    No (default) / Yes

    To see a preview of the photo on the LCD, select Yes.

    Save as Defaults

    No / Yes

    To save settings as the new default, press OK, select Yes, then press OK .

  6. Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.


Changing the number of copies of a photo

To change the number of copies:

  1. Lift the scanner lid, and place the original photo face down in the right front corner of the scanner glass.



    IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).

  2. Close the scanner lid.

  3. Press Home.

  4. Press to select Copy Photo, then press OK.

  5. Make sure Quantity is selected.

  6. Press or to select a number, or use the numeric keypad to enter the number of copies.

  7. Press Start Black to make black-and-white copies, or press Start Color to make color copies.

Enlarging or reducing a photo

To enlarge or reduce the size of the copy:

  1. Lift the scanner lid, and place the original photo face down in the right front corner of the scanner glass.



    IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).

  2. Close the scanner lid.

  3. Press Home.

  4. Press to select Copy Photo, then press OK.

  5. Press to select Copy Size.

  6. Press or to select the copy size.

  7. Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.

Darkening or lightening a copy of a photo

To darken or lighte n the copy of the photo:

  1. Lift the scanner lid, and place the original photo face down in the right front corner of the scanner glass.



    IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).

  2. Close the scanner lid.

  3. Press Home.

  4. Press to select Copy Photo, then press OK.

  5. Press to select Brightness .

  6. Press to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy.

  7. Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.



Previous Next