KODAK EASYSHARE Camera / M522 — Extended user guide


Table of Contents > Taking pictures/videos > Using the self-timer

2 Taking pictures/videos

Using the self-timer

Use the self-timer when you want to be included in a picture, or to ensure a steady Shutter button press. For best results, place the camera on a tripod or steady surface. You can turn on the self-timer using a shortcut (Using shortcuts) or these steps:

  1. Press the Menu button.

  2. Press to choose Self-timer/Burst, then press OK.

  3. Press to choose a Self-timer setting:

    2 Seconds - A picture is taken after a 2-second delay.

    10 Seconds - A picture is taken after a 10-second delay.

    2 Picture Timer - The first picture is taken after a 10-second delay. A second picture is taken 8 seconds later.

  4. Compose the scene. Press the Shutter button halfway, then completely down.

    The camera takes the picture/pictures after the delay.

To take a video after a 2- or 10-second delay, use the same procedure but press the Shutter button completely down while in video mode.



Previous Next