KODAK EASYSHARE Camera / C1530 — Extended user guide


Table of Contents > Taking pictures/videos > Taking panoramic pictures

2 Taking pictures/videos

Taking panoramic pictures

Use panorama to "stitch" up to 3 pictures into a panoramic scene.

NOTE: Only the panoramic picture is saved; individual pictures are not. (Exposure and white balance are set with the first picture. The flash is set to Off.)

  1. Press the Mode button, then until the LCD displays SCN, then press OK.

  2. Press to choose Panorama Left-Right or Panorama Right-Left (depending on the direction you want to pan), then press OK.

  3. Take the first picture.

    After a quickview, the LCD displays the liveview and an "overlay" from the first picture. (You can press the Delete button to start over.)

  4. Compose the second picture. Make the overlay from the first picture cover the same portion in the new picture.

  5. If you are taking/stitching only 2 pictures, press OK to stitch them together.

    After you take 3 pictures, the pictures are automatically stitched together.

NOTE: To use the self-timer 10-second or 2-second setting, see Using the self-timer.



Previous Next