KODAK EASYSHARE Camera / M583 — User guide

Table of Contents > Do more with your camera > Solve camera problems

2 Solve camera problems

Go to www.kodak.com/go/M583support for the Extended user guide, firmware updates, and answers to your questions.

Status	Solution
Camera does not turn on/off or function	Make sure the battery is installed correctly and charged (Attach strap, load and charge battery ).
LCD is too dark.	Adjust the LCD Brightness setting in the Settings menu.
Short battery life	Make sure the battery is charged (Attach strap, load and charge battery ). Limit the time you review pictures/videos on the camera LCD. Purchase a spare battery at www.kodak.com/go/accessories.
Flash does not fire	The flash does not fire in all modes. Change modes as needed (Use modes and effects).
Computer does not communicate with the camera	Turn the camera off, then back on. Make sure the battery is installed correctly and charged (Attach strap, load and charge battery ). Make sure a KODAK Camera USB Cable, Micro B / 5-Pin is connected to the camera and the computer (Install software, transfer pictures). Then turn on the camera. See KODAK Software Downloads at www.kodak.com/go/camerasw.

Previous Next