KODAK EASYSHARE Camera / C1505 — Extended user guide


Table of Contents > Doing more with your camera > Using the menu button to change settings

5 Doing more with your camera

Using the menu button to change settings

You can change settings to get the best results from your camera.

NOTE: Some modes offer limited settings. Some settings remain until you change them; others, until you change modes or turn off the camera.

  1. Press the Menu button.

  2. Press to choose a tab:

    • Capture/Video for the most common picture- and video-taking settings

    • Setup for other camera settings

  3. Press to choose a setting, then press OK.

  4. Choose an option, then press OK.

Using the capture tab (available when the camera is in a capture mode)

Settings More information

Picture Size

Choose a picture resolution.

See Specifications, starting on Specifications.

Self-timer/Burst

Choose Self-timer or Burst feature.

Off

2 Seconds

10 Seconds

2 Picture Timer

Burst On—Press the Shutter button completely down and hold it to take up to 3 pictures.

Exposure Compensation

Make a picture lighter or darker. (Available in Program and Panorama modes.) To access this feature with a shortcut, see Using shortcuts.

See Specifications, starting on Specifications.

ISO Speed

Control the sensitivity of the camera to light.

Auto—For general picture taking.

ISO 80, 100, 200, 400, 800, 1000, 1250

Long Time Exposure

Choose how long the shutter stays open (normally in low-light conditions). For best results, place the camera on a tripod or steady surface.

See Specifications, starting on Specifications.

Color Mode

Choose color tones.

Unavailable in Video mode.

Vivid Color - For increased saturation and exaggerated color.

Full Color - For rich, balanced color.

Basic Color - For accurate color.

Black & White - For black and white.

Sepia - For a reddish-brown, antique look.

White Balance

Choose your lighting condition. (Available only in Program and Panorama modes.)

Auto - Automatically corrects white balance. Ideal for general picture taking.

Daylight - For pictures in natural lighting.

Tungsten - Corrects the orange cast of incandescent light bulbs. Ideal for indoor pictures under tungsten or halogen lighting without flash.

Fluorescent - Corrects the green cast of fluorescent lighting. Ideal for indoor pictures under fluorescent lighting without flash.

Open Shade - For pictures in shade in natural lighting.

Sharpness

Control picture sharpness or softness.

See Specifications, starting on Specifications.





Previous Next