KODAK OFFICE HERO 6.1 All-in-One Printer — Extended User Guide
Table of Contents > Scanning > Before you begin scanning
8 Scanning
Before you begin scanning
If you are scanning to a computer, make sure that the printer is connected to the computer using a USB cable, Ethernet cable, or wireless network (see Networking Your Printer).
If you want to scan to an email address or to a shared network folder, you need to:
-
make sure the printer is connected to the computer using a wireless or Ethernet connection.
-
set up a profile using the Online Printer Management Tool (see Setting up Scan To Email and Setting up Scan To Network Folder).
Changing the scan settings for scanning from the printer control panel
Before you scan from the printer control panel, you must adjust the scan settings.
NOTE: | These settings do not apply to Scan to Email or Scan to Network Folder. To change scan setting for scanning to email or to network folder, see Setting options for scan to email or Setting scan settings for scan to network folder. |
-
Open Home Center Software.
-
Select Printer Tools on a computer with WINDOWS OS, or Tools on a computer with MAC OS.
NOTE: To get to Printer Tools without Home Center Software (WINDOWS OS only), select Start > All Programs > Kodak > KODAK AiO Printer Tools.
-
Under the Tools heading, select Printer Scan Settings.
-
Adjust settings for scanning documents and pictures:
-
To select a program that your scanned images or documents will appear in when you scan from the printer control panel:
( 1 ) Select the General tab.
(2) Under the Program List heading, click next to the currently selected program.
(3) From the list, select the program in which you want the scanned files to open.
-
To adjust settings for scanning documents, select the Document tab, then select an option for each setting:
-
To adjust settings for scanning pictures, select the Picture tab, then select an option for each setting:
NOTE: Before you save a scanned file in Home Center Software, you can preview, crop and sharpen the image, and adjust the color. On a computer with WINDOWS OS, see the Home Center Software Help (? icon) for instructions.
-
-
When you are finished making selections, click OK on the bottom right of the Printer Scan Settings window.
-
Close the Printer Tools window.
Previous Next