KODAK EASYSHARE Camera / M5350 — Extended user guide


Table of Contents > Taking pictures/videos > Using Program mode

2 Taking pictures/videos

Using Program mode

Program mode gives access to manual settings like ISO, White Balance, Focus Zone, and Exposure Compensation.

  1. Press the Mode button , choose Scene mode (see Using different modes and effects), and press OK. Choose Program, then press OK.

  2. Press to choose a setting, then press OK. Press to change a setting, then press OK to save it.

Self-timer/Burst

Include yourself in a picture (Using the self-timer). Burst takes a series of pictures in rapid succession.

Exposure Compensation

Adjust the exposure. If a scene is too light, decrease the setting; if it's dark, increase the setting.

ISO

Adjust the camera's sensitivity to light. Higher ISO indicates greater sensitivity.

NOTE: A higher ISO may produce unwanted "noise" in a picture.

White Balance

To make picture color more accurate, choose the setting that matches the current lighting.

Focus Zone

Choose Multi-Zone, Center-Zone, Face Priority.

Color Mode

Choose Vivid, Full, Basic, Black & White, or Sepia.

Sharpness

Choose Sharp, Normal, or Soft.

Settings

Choose Vivid, Full, Basic, Black & White, or Sepia.



Previous Next