KODAK HERO 5.1 All-in-One Printer — Extended User Guide
Table of Contents > Networking Your Printer > Adding a wireless network connection to a USB-connected computer
2 Networking Your Printer
Adding a wireless network connection to a USB-connected computer
You can change the way you connect to your printer at any time.
Changing from USB to a wireless connection
To change the printer connection type from USB to a wireless (Wi-Fi) network:
If your printer is connected to a computer with WINDOWS OS:
-
Disconnect the USB cable from your printer and computer.
-
If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network.
-
On your computer, disable any firewall you have installed until you have successfully completed the installation.
-
Select Start > All Programs > Kodak > KODAK Printer Setup Utility.
-
If your wireless printer (example: KodakHERO5.1+1133) is not listed:
-
Select No, my printer is not listed, then click Next.
-
Select your printer from the list.
-
Select Network - Wireless/Wi-Fi, then click Next. When your printer is detected, driver installation begins.
-
-
If your wireless printer (example: KodakHERO5.1+1133) is listed:
-
Select the printer that is connected to your network.
-
Select Yes, my printer is listed, then click Next. When your printer is detected, driver installation begins.
-
-
-
When driver installation is complete, click Done.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO5.1+1133).
If your printer is connected to a computer with MAC OS:
-
Disconnect the USB cable from your printer and computer.
-
If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network.
-
Select Apple > System Preferences.
-
Under Hardware, select Print & Fax or Print & Scan.
-
Click + in the dialog box.
-
Select your printer from the list.
-
Click Add, if required.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO5.1+1133).
Previous Next