KODAK HERO 5.1 All-in-One Printer — Extended User Guide
Table of Contents > Handling Paper > Loading paper
4 Handling Paper
Loading paper
Loading plain paper
The paper input tray capacity is 100 sheets of plain paper.
-
Pull out the paper output tray extender until it is fully extended, and move the paper stop to the upright position.
NOTE: To load legal-size paper, pull out the paper input tray extender until it is fully extended, but do not lift the paper stop.
-
Lift the paper output tray.
-
Move the left paper-edge guide to the far left.
-
Fan and stack the paper, then insert it into the paper input tray.
-
Move the paper forward until it stops.
-
Move the left paper-edge guide until it touches the paper.
Loading photo paper
The paper input tray capacity is 20 sheets of photo paper.
-
Lift the paper output tray.
-
Remove any paper from the paper input tray.
-
Move the left paper-edge guide to the far left.
-
Fan and stack the photo paper, then insert the paper (short side first) with the logo side facing up and the glossy side down.
IMPORTANT: If the photo paper is loaded the wrong way, the ink on your pictures will be wet and the image quality will be affected.
-
Move the paper forward until it stops.
-
Move the left paper-edge guide until it touches the paper.
Loading envelopes
The paper input tray capacity is 20 envelopes.
IMPORTANT: | Do not load envelopes with cutout or clear windows. |
-
Lift the paper output tray.
-
Remove any paper from the paper input tray.
-
Move the left paper-edge guide to the far left.
-
Insert the envelope(s) with the flap up and against the right side of the tray.
-
Move the envelopes forward until they stop.
-
Move the left paper-edge guide until it touches the envelope(s).
Previous Next