KODAK HERO 5.1 All-in-One Printer — Extended User Guide
Table of Contents > Copying > Copying a photo
7 Copying
Copying a photo
You can copy a photo using the default settings, or you can adjust the quantity, size, quality, and brightness of your copies.
Using the default settings to copy a photo
The default settings are either the factory default settings (see Resetting factory defaults), or defaults that you have set on the printer (see ).
To copy a photo using the current default settings:
-
Lift the scanner lid, and place the photo face down in the right-front corner of the scanner glass.
-
Close the lid.
-
Press Home.
-
Press to select Copy Photo.
-
Press Start to begin copying.
Adjusting the settings and copying a photo
-
Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass.
-
Close the lid.
-
Press Home.
-
Press to select Copy Photo, then press OK.
-
Press to select an option, then press or to change the setting .
Changing the number of copies of a photo
-
Lift the scanner lid, and place the photo face down in the right-front corner of the scanner glass.
-
Close the lid.
-
Press Home.
-
Press to select Copy Photo, then press OK.
-
Make sure Quantity is selected.
-
Press or to select a number.
-
Press Start to begin copying.
Enlarging or reducing the size of a copy of a photo
-
Lift the scanner lid, and place the photo face down in the right-front corner of the scanner glass.
-
Close the lid.
-
Press Home.
-
Press to select Copy Photo, then press OK.
-
Press to select Copy Size.
-
Press or to select the copy size.
-
Press Start to begin copying.
Darkening or lightening a copy of a photo
-
Lift the scanner lid, and place the photo face down in the right-front corner of the scanner glass.
-
Close the lid.
-
Press Home.
-
Press to select Copy Photo, then press OK.
-
Press to select Brightness.
-
Press to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy.
Previous Next