KODAK EASYSHARE Camera / Z5120 — Extended user guide


Table of Contents > Troubleshooting > Eye-Fi problems

12 Troubleshooting

Eye-Fi problems

Status Solution

Get support for Eye-Fi Cards and Software.

Go to support.eye.fi

Eye-Fi Card is not working in this camera.

  • Choose an Eye-Fi X2 Card or higher with a firmware version of 4.5174 or higher. (View and update firmware using the Eye-Fi Center Software that accompanies the card.)

  • The camera must be turned on to transfer pictures to the computer or mobile device.

Eye-Fi Endless Memory is not working.

CAUTION:
If you're using an Eye-Fi Card in this camera, it's critical that you disable (don't turn on) Endless Memory Mode in Eye-Fi Center Software.

Eye-Fi Card gets warm.

  • This is normal.

Camera battery life is shorter.

  • Battery life is reduced when using an Eye-Fi Card.

Transferring pictures is slow using the Eye-Fi Card.

  • For the best reception when transferring pictures to a computer or mobile device, the rear (LCD side) of the camera should face the Wi-Fi access point.



Previous Next