KODAK EASYSHARE Camera / Z5120 — Extended user guide


Table of Contents > Taking pictures/videos > Using the Self-timer/Burst button

3 Taking pictures/videos

Using the Self-timer/Burst button

Use the self-timer when you want to be included in a picture, or to ensure a steady Shutter button press. Place the camera on a tripod or flat surface.

  1. Choose a setting:

    10 seconds - A picture is taken after a 10-second delay (so you have time to get into the scene).

    2 seconds - A picture is taken after a 2-second delay (for a steady, shutter release).

    2 shot - The first picture is taken after a 10-second delay. A second picture is taken 8 seconds later.

  2. Compose the scene. Press the Shutter button and pause halfway down halfway (to focus). Continue pressing the Shutter button until it's completely down (to start the self-timer).

    The Self-timer light blinks until a picture is taken.

NOTE: Use the same procedure to take a 2- or 10-second self-timer video, but press the Shutter button completely down. When the self-timer is off, the icon shown is . You can also press the Menu button (Using the Menu button to change camera settings) to access this setting.



Previous Next