KODAK HERO 3.1 All-in-One Printer — Extended User Guide


Table of Contents > Scanning > Scanning from the control panel

8 Scanning

Scanning from the control panel

When you scan a document or picture(s) from the control panel, you have the following options:

  • Scan to Computer - scans to a file or to Home Center Software on your computer

  • Scan to Memory Card - scans to a memory card in the memory card slot

Scanning to a computer

To scan to a computer:

  1. Lift the scanner lid, and place the document or picture face down on the glass, then close the lid.



  2. Press to select Scan, then press OK.

  3. Select Scan to Computer, then press OK.

  4. Press to select an option, then press or to change the setting.

    Scan Option Settings Description

    Scan To

    USB-connected Computer (default)

    The scanned file is sent to the USB-connected computer.

    Name of computer (only if a computer is connected by wireless or Ethernet network)

    The scanned file is sent to the computer on the wireless or Ethernet network.

    Scan What

    Document (default)

    Sets the scan settings for scanning a document (see Changing the scan settings for scanning from the printer control panel).

    Photo

    Sets the scan settings for scanning a picture (see Changing the scan settings for scanning from the printer control panel).

    Destination

    File (default)

    Sends the scanned file in the format and to the location on your computer that you designate.

    Application (available only when Home Center Software is installed on computer)

    Sends the scanned file to Home Center Software.

    Save as Defaults

    No / Yes

    To save the settings as the new default, press OK. With Yes selected, press OK.

  5. Press Start. The scanned file appears at the destination you specified.

Scanning to a Memory Card

To scan to a memory card:

  1. Lift the scanner lid, and place the document or picture face down on the glass, then close the lid.



  2. Press to select Scan, then press OK.

  3. Press to select Scan to Memory Card , then press OK.

  4. Press to select an option, then press or to change the setting.

    Scan Option Settings Description

    Scan What

    Photo (default)

    Sets the scan settings for scanning a picture (see Changing the scan settings for scanning from the printer control panel).

    Document

    Sets the scan settings for scanning a document (see Changing the scan settings for scanning from the printer control panel).

    Scan Size

    Auto (default) 2 x 3 3.5 x 5 4 x 6 4 x 7 4 x 8 5 x 7 4 x 12 8 x 10 8.5 x 11 A4 8.5 x 14

    Determines the size that is scanned.

    Save as Defaults

    No / Yes

    To save the settings as the new default, press OK. With Yes selected, press OK.

  5. Press Start. The scanned file appears at the destination you specified.



Previous Next