KODAK HERO 9.1 All-in-One Printer — Extended User Guide
Table of Contents > Printing > Printing documents
5 Printing
Printing documents
To print a document from your computer:
-
Open the document.
-
Select File > Print.
-
In the Print dialog box, select your KODAK Printer.
-
Choose the pages to print, number of copies, etc, then click OK (on a computer with WINDOWS OS) or Print (on a computer with MAC OS).
Printing two-sided documents
You can print two-sided documents automatically with the built-in duplexer or manually by rotating and reloading the paper after the first side is printed.
Automatic two-sided printing
The duplexer can print two-sided documents automatically on plain paper in standard sizes:
-
-
letter (8.5 x 11 in. / 22 x 28 cm)
-
A4 (8.3 x 11.7 in. / 21 x 30 cm)
-
B5 (6.9 x 9.8 in. / 18 x 25 cm)
NOTE: The paper width must be 3.9 to 8.5 in. / 10 to 22 cm. The paper length must be 7 to 11.7 in. / 18 to 30 cm.
-
The duplexer cannot print:
-
borderless prints
-
poster layout
Automatic two-sided printing from a computer with WINDOWS OS
To print two-sided documents from a computer with WINDOWS OS using the duplexer:
-
Load plain paper into the paper tray.
-
Open the document you want to print, then select File > Print.
-
In the Print dialog box, make sure that KODAK HERO 9.1 AiO is selected (printers with a wireless connection have a 4-digit number added to the end of the name), then click Properties.
-
Select the Layout tab.
-
In the Two-sided printing field, select Automatic.
NOTE: You can also select automatic two-sided printing from the General tab under the Job settings field.
-
Under "Flip on:", select Long edge or Short edge, then click OK.
-
Click OK to start the print request.
Automatic two-sided printing from a computer with MAC OS
To print two-sided documents from a computer with MAC OS using the duplexer:
-
Load plain paper into the paper tray.
-
Open the document you want to print, then select File > Print.
-
In the Print dialog box, make sure that Eastman Kodak Company HERO 9.1 AiO is selected (printers with a wireless connection have a 4-digit number added to the end of the name).
-
In the Copies & Pages drop-down list, select Layout.
-
In the Two-Sided drop-down list, select either Long-Edge binding or Short-Edge binding.
-
Click Print.
Manual two-sided printing
You can print two-sided documents on any size paper that the printer accepts (see Paper sizes) when you rotate the paper manually.
IMPORTANT: | Two-sided printing can only be done on media that can absorb ink on both sides, such as plain paper or two-sided photo paper. Do not print two-sided on bar-coded photo paper (the bar code is on the back side). |
Manual two-sided printing from a computer with WINDOWS OS
To print two-sided documents from a computer with WINDOWS OS:
-
Load paper into the paper tray.
-
Open the document you want to print, then select File > Print.
-
In the Print dialog box, make sure that KODAK HERO 9.1 AiO is selected (printers with a wireless connection have a 4-digit number added to the end of the name), then click Properties.
-
Select the Layout tab.
-
In the Two-sided printing field, select Manual, then click OK.
NOTE: You can also select manual two-sided printing from the General tab under the Job settings field.
-
Under "Flip on:", select Long edge or Short edge, then click OK.
-
Click OK to start the print request.
-
When a message appears on your computer and control panel, remove the printed pages from the output tray, then follow the instructions on the control panel.
-
Press on the control panel.
Manual two-sided printing from a computer with MAC OS
To print two-sided documents from a computer with MAC OS:
-
Load paper into the paper tray.
-
Open the document you want to print, then select File > Print.
-
In the Print dialog box, make sure that Eastman Kodak Company HERO 9.1 AiO is selected (printers with a wireless connection have a 4-digit number added to the end of the name).
-
In the Print dialog box, select the two-sided check box.
-
Click Print.
-
When the even pages have finished printing, follow the instructions on the control panel to reload the printed pages in the paper input tray.
-
Press on the control panel to print the odd numbered pages.
Printing forms from the control panel
You can print the following forms from the control panel:
-
Sheet music (landscape)
To print a form:
-
Press .
-
Touch , then touch Forms.
-
Touch a form type to select it.
-
Use the LCD keyboard to type a quantity, then touch OK.
-
Press on the control panel.
Previous Next