KODAK ESP 3.2 and 3.2s All-in-One Printers — Extended User Guide


Table of Contents > Printer Overview > Configuring printer settings

1 Printer Overview

Configuring printer settings

To set or change basic printer settings:

  1. Press .

  2. Press , then touch Printer Settings.

  3. Touch the following settings:

    • Date and Time

      • Touch Year, Month, Day, Hour, or Minute to change the individual settings. Touch when you are done.

        NOTE: You can also synchronize the printer date and time to your computer using Home Center Software.

    • Button Sounds

      • Touch On or Off to set.

    • Time to Low Power

      • To conserve energy, your printer will enter a low power (sleep) mode after being idle for a default delay time of 1 hour. You can increase the delay time to low power. Increasing the delay time may result in reduced energy savings.

        Touch the time to low power (select from 1 to 4 hours in 0.5 hour increments). After the time to low power, the printer enters a low-power (sleep) mode.

    • Tagged Images Printing (see Printing tagged pictures)

      • Touch On or Off to set.

    • Language

      • Touch or to scroll through the languages, then touch a selection.

    • Country/Region

      • Touch or to scroll through the countries, then touch a selection.

    • Reset All Settings (see Resetting factory defaults)

      NOTE: Resetting factory defaults does not change the date and time, language, country/region, or network settings.

    • Printer Info

      • Touch to display the version of firmware currently running on the printer. Press OK when you are done.

  4. Press to return to the Home Screen.



Previous Next