KODAK HERO 4.2 All-in-One Printer — Extended User Guide
Table of Contents > Troubleshooting > Status lights
11 Troubleshooting
Status lights
The status lights indicate the condition of the printer. There are two status lights on the printer: one that indicates power, the other indicates Wi-Fi status.
Power status light
| Power light | What it means |
|---|---|
|
Off |
The printer is turned off. Press the on/off button to turn on power. The printer does not have power. Make sure that the power cord is plugged into the back of the printer and into an electrical outlet, and that the electrical outlet has power. |
|
Blinking |
The printer is busy. Wait for the printer to finish the task. |
|
On |
The printer is ready. |
Wi-Fi status light
| Wi-Fi status light | What it means |
|---|---|
|
Off |
The Wi-Fi radio is either turned off or is turned on but not connected to a wireless network. |
|
Blinks continuously |
The Wi-Fi radio is turned on and the printer is searching for available wireless networks within range. |
|
Blinks intermittently |
The Wi-Fi radio is turned on and the printer cannot find any available wireless networks within range, or the Wi-Fi radio connection has been interrupted or is too weak to send signals. To find and connect to an available wireless network within range, turn the Wi-Fi radio off, and run the Wi-Fi Setup Wizard (see Connecting to a wireless network). |
|
On |
The Wi-Fi radio is turned on and there is a working connection between the printer and a wireless network. |
Previous Next