KODAK HERO 4.2 All-in-One Printer — Extended User Guide
Table of Contents > Printer Overview > Configuring printer settings
1 Printer Overview
Configuring printer settings
NOTE: | When you first power on the printer, the LCD prompts you to select the Language and Country/Region. |
To set or change basic printer settings:
-
Press .
-
Touch , then touch Printer Settings.
-
Touch the following settings:
-
Date and Time
-
Touch or to select Year, Month, Day, Hour, or Minute. Touch each setting to change the values; touch when you are done.
NOTE: You can also synchronize the printer date and time to your computer using Home Center Software.
-
-
Button Sounds
-
Touch Off, Soft, or Loud to set.
-
-
Time to Low Power
To conserve energy, you can set your printer to go into a low-power mode after a set amount of time.
-
Touch the time to low power (select from 1 to 4 hours in 0.5 hour increments). After the time to low power, the printer enters a low-power (sleep) mode.
-
-
Tagged Images Printing
-
Touch On or Off to set.
-
-
Language
-
Touch or to scroll through the languages, then touch a selection.
-
-
Country/Region
-
Touch or to scroll through the countries or regions, then touch a selection.
-
-
Reset All Settings (see Resetting factory defaults)
NOTE: Resetting factory defaults does not change the date and time, language, country/region, or network settings.
-
Printer Info
-
Touch to display the version of firmware currently running on your printer.
-
-
-
Press to return to the Home Screen.
Previous Next