KODAK DX3500 Digital Camera — User's Guide

Table of Contents > Using Pictures on Your Computer > Connecting to Your Computer

---

6 Using Pictures on Your Computer

Connecting to Your Computer

You can transfer your pictures from your camera to your computer using either the provided USB cable or the KODAK Camera Dock.

Connecting With the USB Cable

		1. Turn off the camera.
		2. Plug the labeled ( ) end of the USB cable into the labeled USB port on your computer. If the port is not labeled, see your computer User's Guide.
		3. Plug the other end of the USB cable into the labeled USB port on the camera.
		4. Turn on the camera.

Connecting With the KODAK Camera Dock

		1. Open the connection door on the bottom of the camera.
		2. Place the camera in the Camera Dock.
		3. Push the Connect button.
		For more information, see Using the KODAK Camera Dock.

NOTE:

You can also use a KODAK USB Picture Card Reader to transfer your pictures. See your KODAK retail dealer or visit our Web site at http://www.kodak.com/go/accessories.

Previous Next