KODAK EASYSHARE DX3900 Zoom Digital Camera — User's Guide


Table of Contents > Using the KODAK EASYSHARE Camera Dock > Transferring Pictures

8 Using the KODAK EASYSHARE Camera Dock

Transferring Pictures

To transfer pictures from your camera to your computer:
  1. Place the camera in the Camera Dock.

  2. Push the Connect button.

  • The Camera Dock light blinks green while the connection to the computer is active.

  • If installed, KODAK Picture Transfer Software automatically opens on your computer and your pictures are transferred.

    You can also transfer your pictures manually while the green light is blinking. See Transferring Your Pictures Manually.

  • Then, KODAK Picture Software opens so you can work with your pictures on your computer. For further details, see Using Pictures on Your Computer.

NOTE: When your pictures are transferred, leave the camera in the Camera Dock. Ten minutes after the transfer is complete, the Camera Dock begins to monitor battery power and then begins charging whenever necessary.



Previous Next