KODAK EASYSHARE DX3215 Zoom Digital Camera — User's Guide

Table of Contents > Getting Started > Loading the Battery

---

1 Getting Started

Loading the Battery

A KODAK Lithium Battery, KCRV3 (or equivalent) is included.*

		1. Open the battery door.
		2. Insert the battery as shown.
		3. Close the battery door. NOTE: If the battery is removed after the Date/Time are set (Setting the Date and Time), the camera will retain the setting for approximately 10 minutes.

See Using Your Batteries for the types of batteries you can use in your camera. For acceptable battery life and to make sure your camera operates dependably, do not use alkaline batteries.

NOTE:

* AA lithium batteries may be provided. If your camera was packaged with a KODAK EASYSHARE Camera Dock, the KODAK Ni-MH Rechargeable Battery Pack is provided. For details on charging and loading the Battery Pack, see Charging the Battery Pack.

Previous Next