KODAK EASYSHARE DX3215 Zoom Digital Camera — User's Guide


Table of Contents > Customizing Your Camera Settings > Review Options

4 Customizing Your Camera Settings

Review Options

Starting a Selectable-Interval Slide Show

You can set the display interval to 5, 10, 30, or 60 seconds.

  1. Slide the Mode selector to Setup .

  2. Press the buttons to highlight the Review Options icon, then the buttons to highlight Slide Show. Press Select.

  3. Select how long you wish to display each picture, then press Select.

    Each picture from internal memory or MMC/SD card is displayed once at the desired interval. The setting remains until you turn off the camera.

  4. To cancel the Slide Show, press Select.

Setting Video Out

Use the Video Out feature to match the camera's video signal to the standard that applies in your geographical location. Video Out must be set correctly to run a slide show on a television or other external device.

  1. Slide the Mode selector to Setup .

  2. Press the buttons to highlight the Review Options icon.

  3. Press the buttons to highlight Video Out, then press Select.

  4. Highlight the desired setting, then press Select.

    • NTSC: Standard used in most countries except Europe. The United States and Japan use NTSC.

    • PAL: Standard used in European countries.

    The setting remains until you change it.

Print Order

Before using this feature, ensure that an MMC/SD card is inserted in the camera.

  1. Slide the Mode selector to Setup .

  2. Press the buttons to highlight the Review Options icon, then the buttons to highlight Print Order. Press Select.

  3. Select All Pictures (applies to all pictures on MMC/SD card), Cancel Order, or Future Pictures (applies to future pictures and leaves current pictures unchanged). Press Select.

  4. Press the buttons to select the desired number of prints. Press Select.



Previous Next