KODAK EASYSHARE DX3215 Zoom Digital Camera — User's Guide
Table of Contents > Using the EASYSHARE Camera Dock > Connecting the EASYSHARE Camera Dock
7 Using the EASYSHARE Camera Dock
Connecting the EASYSHARE Camera Dock
Ensure that you have installed the software from the KODAK Picture Software CD (see Install the Software). Then, remove the camera from the EASYSHARE Camera Dock.
|
|
|
|
|
1.
Plug the labeled
 end of the USB cable (included with camera) into the labeled USB port on the computer. |
||
|
2.
Plug the other end of the USB cable into the labeled USB connector on the back of the Dock.
|
|||
|
3.
Plug the AC adapter (included with the Dock) into the back of the Dock and into a power outlet.
|
|||
Your AC adapter may be different from the one pictured, or may have additional plugs. Use the plug that accommodates your type of power outlet.
Keep the EASYSHARE Camera Dock connected for transferring pictures. Keep the AC adapter connected for charging the Battery Pack and providing power to the camera.
Previous Next