KODAK EASYSHARE LS420 Digital Camera — User's Guide


Table of Contents > Taking Pictures > Taking a Picture

2 Taking Pictures

Taking a Picture


  1. Turn the Mode dial to Still .

  2. Use the LCD to frame your subject. (If you need to conserve battery power, press the Select button to turn off the LCD. Then use the Viewfinder to frame your subject.)

  3. Press the Shutter button half-way to set the exposure, then completely down to take the picture.

The ready light blinks green while the picture is saved.

The ready light blinks yellow while the flash is recharging.

CAUTION:
Do not insert or remove a card when the green ready light is blinking. Doing so may damage your pictures, card, or camera.


Previous Next