KODAK EASYSHARE DX4900 Zoom Digital Camera — User's Guide
Table of Contents > Using Pictures on Your Computer > Connecting to Your Computer
7 Using Pictures on Your Computer
Connecting to Your Computer
You can transfer your pictures from your camera to your computer using either the provided USB cable or the KODAK EASYSHARE Camera Dock.
Connecting With the USB Cable
|
|
|
|
|
1.
Plug the labeled (
 ) end of the USB cable into the labeled USB port on your computer. If the port is not labeled, see your computer User's Guide. |
||
|
2.
Plug the other end of the USB cable into the labeled USB port on the camera.
|
|||
|
3.
Turn on the camera.
|
|||
Connecting With the KODAK EASYSHARE Camera Dock
|
|
|
|
|
|
1.
Open the connection door on the bottom of the camera.
|
||
|
2.
Place the camera in the Camera Dock.
|
|||
|
3.
Push the Connect button.
|
|||
| For more information, see Using the KODAK EASYSHARE Camera Dock. | |||
| NOTE: | You can also use a KODAK COMPACTFLASH Card Reader-Writer to transfer your pictures. See your Kodak retail dealer or visit our Web site at http://www.kodak.com/go/easyshareaccessories. |
Previous Next