KODAK EASYSHARE LS443 Zoom Digital Camera — User's Guide
Table of Contents > Taking Pictures > Setting Long Time Exposure
2 Taking Pictures
Setting Long Time Exposure
Use Long Time Exposure to control how long the shutter stays open. Settings are: Off, 0.7, 1, 1.5, 2, 3, and 4 seconds.
| NOTE: | Long Time Exposure cannot be used with Exposure Compensation. If ISO speed has been changed, it is reset to Auto. |
Set Long Time Exposure
|
|
|
|
|
1.
In any Still mode, press the Menu button.
|
|||
|
2.
Move the joystick
 to highlight Long Time Exposure  , then press the OK button. |
|||
|
3.
Move the joystick
 to select an option, then press the OK button. |
||
|
4.
Press the Menu button to exit the menu.
|
|||
Take the Picture
-
Place the camera on a flat surface or use a tripod.
-
Use the LCD to frame your subject. Press the Shutter button half-way to set the focus, then continue pressing completely down to take the picture.
This setting remains until you move the Mode dial or turn off the camera.
|
Default flash setting: |
Off |
|
Available flash settings: |
Auto, Flash Off, Fill Flash, Red-eye |
|
Camera returns to default: |
When you change modes or turn off the camera. |
Previous Next