KODAK EASYSHARE CX4230 Zoom Digital Camera — User's Guide

Table of Contents > Getting Started > Loading the Batteries

---

1 Getting Started

Loading the Batteries

A KODAK CRV3 Lithium Battery, or equivalent, is included with your camera.*

		1. Turn off the camera.
		2. On the bottom of the camera, slide the battery door and lift to open.
		3. Insert the CRV3 Lithium battery or 2, AA batteries.*
		4. Close the battery door.

IMPORTANT BATTERY INFORMATION

For acceptable battery life and to make sure your camera operates dependably, do not use alkaline batteries.

See Using Your Batteries for the types of batteries you can use in your camera.

* If your camera was packaged with a KODAK EASYSHARE Camera Dock II, see Installing the Battery Pack in the Camera for details on using the KODAK EASYSHARE Ni-MH Rechargeable Battery Pack.

Previous Next