KODAK EASYSHARE CX4230 Zoom Digital Camera — User's Guide

Table of Contents > Taking Pictures—Capture Mode > Taking a Picture

2 Taking Pictures—Capture Mode

Before you take a picture, make sure your picture storage location is set the way you want it (see Choosing Internal Memory or MMC/SD Card).


		1. Use the Viewfinder to frame your subject. (Or press the Select button and use the LCD. See Liveview—Using the LCD to Frame Your Subject.)
		2. Press the Shutter button half-way down to set exposure and focus.
		3. Press the Shutter button completely down to take the picture. The ready light blinks green while the picture is saved. The ready light blinks orange if the flash is recharging or if there is an auto-exposure or auto-focus error.

CAUTION:
Do not insert or remove a card when the green ready light is blinking. It may damage your pictures, card, or camera.

Previous Next