KODAK EASYSHARE DX4330 Zoom Digital Camera — User's Guide


Table of Contents > Getting Started > Choosing Internal Memory or MMC/SD Card

1 Getting Started

Choosing Internal Memory or MMC/SD Card

The camera offers two options for storing pictures and videos:

Internal Memory —store pictures and videos in internal memory.

MMC/SD Card —store as many pictures and videos as you like, depending on the size of the card. Purchase cards at
http://www.kodak.com/go/accessories. For storage capacities, see Storage Capacities.

Managing Your Storage Location Setting

  1. Turn on the camera.

  2. Press the Menu button.

  3. Press to highlight Image Storage , then press the OK button.


  4. Press to highlight an option, then press the OK button:

Auto (default)—the camera uses the card if one is in the camera. If not, the camera uses internal memory.

Internal Memory—the camera always uses internal memory, even if a card is installed.
  5. Highlight Continue, then press the OK button again.

The setting remains until you change it and applies to all camera functions.

  6. Press the Menu button to exit the menu.

Checking Your Storage Setting

In Still and Video modes, the storage location icon that appears in the status bar indicates the camera's storage location. To check the location, either:
  • Turn the Mode dial from the Off position, or

  • In any capture mode, press .

    —Memory Card

    —Internal Memory

Checking a Picture or Video's Location

In Review mode, the storage location icon that appears with a picture indicates the location of the picture or video and the camera setting.


Press the Review button.

—Picture or video is stored on a card

—Picture or video is stored in internal memory



Previous Next