KODAK EASYSHARE DX4330 Zoom Digital Camera — User's Guide

Table of Contents > Using the Optional EASYSHARE Camera Dock II > Installing the Battery Pack in the Camera

---

9 Using the Optional EASYSHARE Camera Dock II

Installing the Battery Pack in the Camera

The Camera Dock will only charge the Battery Pack (not other batteries).

		1. Turn off the camera.
		2. Open the battery door.
		3. Install the Battery Pack as shown. CAUTION: The Battery Pack can only be inserted into the camera as shown. If the Battery Pack does not install, reposition it and try again. DO NOT FORCE IT; doing so can damage your camera.
		4. Close the battery door.

IMPORTANT:

The Battery Pack is not charged when you receive it. See Charging the Battery Pack for charging instructions.

Previous Next