KODAK EASYSHARE CX4200 Digital Camera — User's Guide

Table of Contents > Customizing Camera Settings—Setup Mode > Turning On Liveview

---

5 Customizing Camera Settings—Setup Mode

Turning On Liveview

The Liveview feature displays a live image on the LCD so you can frame your picture in the LCD instead of the Viewfinder (see Liveview—Using the LCD to Frame Your Subject). The default setting is Off, which means that you must press the OK button to see the live image.

IMPORTANT:

Liveview quickly depletes battery power; use it sparingly.

Turn on Liveview:

1. In Capture or Review mode, press the Menu button.

2. Highlight Setup , then press the OK button.

3. Highlight Liveview , then press the OK button.

4. Highlight On, then press the OK button.

   The live image is displayed whenever the camera is on. Liveview automatically turns off after one minute to conserve battery power. You can manually turn it back on by pressing the OK button.
   
   

5. Press the Menu button to turn off the menu.

   This setting remains until you change it.
   
   

Previous Next