Kodak EasyShare LS633 zoom digital camera — User's Guide

Table of Contents > Taking Pictures > Using the Auto Focus Framing Marks

---

2 Taking Pictures

Using the Auto Focus Framing Marks

For the best possible pictures, the camera attempts to focus on foreground subjects (even if the subjects are not centered in the scene).

1. Turn on the camera in any Still mode (except Landscape).

   The camera screen turns on.
   
   

2. Use the camera screen to frame your subject. Press the Shutter button half-way and hold to set the exposure and focus.

   The framing marks indicate the main focus area or areas. When the framing marks turn red, focus is achieved. If the camera is not focusing on the desired subject (or if the framing marks disappear), release your finger, recompose the scene, and repeat Step 2.
   
   

   While Shutter Button is Pressed Half-way
   	Center focus
   	Center wide focus
   	Side focus
   	Center and side focus
   	Left and right focus

3. Press the Shutter button the rest of the way down to take the picture.

NOTE:

Framing marks appear when the camera screen is on. (Framing marks do not appear in Landscape mode.) When the focus is set to Center Zone, focus is fixed at Center wide (see Setting Focus Zone).

Previous Next