Kodak EasyShare LS633 zoom digital camera — User's Guide
Table of Contents > Using the Camera Dock 6000 > Installing the Custom Camera Insert
9 Using the Camera Dock 6000
Installing the Custom Camera Insert
A universal insert is pre-installed in the camera dock. It allows all Kodak EasyShare CX/DX6000 series and LS600 series cameras to use the camera dock.
A custom insert is included with your camera. It provides a perfect fit and more stability for the Kodak EasyShare LS633 zoom digital camera.
Remove the Universal Insert
|
|
|
|
|
1.
Place your thumbs against the front of the universal insert. Press in and lift.
|
||
|
2.
Lift the side edge of the insert, then remove the insert from the dock.
|
||
|
3.
Save the universal insert as a spare.
|
|||
Install the Custom Insert
|
|
|
|
|
|
1.
Position the custom insert so that the cutout lines up with the camera dock connector.
|
||
|
2.
Fit the insert into the groove in the dock. Snap it into place.
|
|||
Previous Next