Kodak EasyShare CX6230 zoom digital camera — User's Guide


Table of Contents > Taking Videos > Putting Yourself in the Video

3 Taking Videos

Putting Yourself in the Video

The Self Timer creates a 10-second delay between the time you press the Shutter button and the time video recording begins.

  1. In Video mode , press the Menu button.


  2. Press to highlight the Self Timer icon , then press the OK button.

  3. Highlight On, then press the OK button.


  4. Highlight an option, then press the OK button:

Maximum - records until you stop recording or until storage is full. (The maximum recording time is 30 seconds.)

Seconds - records for the specified time or until storage is full.

The Self Timer icon appears in the status area.

NOTE: If the current storage location does not have adequate space, some video length options are not displayed. (See Video Storage Capacity for storage capacities.)

  5. Place the camera on a flat surface or use a tripod.


  6. Compose the scene.

Press the Shutter button completely down, then move so that you are in the scene.

The Self Timer/Video light blinks slowly for 8 seconds (then quickly for 2 seconds) before the video begins recording. The light stays on while recording.

The Self Timer turns off after you record the video, change modes, or turn off the camera.



Previous Next