Kodak EasyShare printer dock 4000 — User's Guide

Table of Contents > Printing Without a Computer > Printing from Your Camera

3 Printing Without a Computer

Printing from Your Camera

1. Make sure the AC power cord is connected and the color cartridge and paper are loaded (see Getting Started with Your Printer Dock).

2. Take a picture with your camera.

3. Place the camera in the printer dock (see Getting Started with Your Camera).

4. On the printer dock, press the Print Mode button to change print modes:

Order —prints pictures tagged for print in your camera's Share or Print Order menu.

Last — prints the last picture taken, or the last picture viewed, when the camera is docked and in review mode.

All —prints all the pictures in your camera's internal memory and memory card.

Index —prints index prints of all the pictures in your camera's internal memory and memory card.

5. Press the Print

button.

Printing starts. The paper cycles four times during the printing process before the finished print is ejected. Each of the first three passes places a layer of color (cyan, yellow, and magenta). The fourth pass places a clear coating that protects and preserves the image quality.

CAUTION:
Wait until printing is complete before removing prints, the paper tray, or the camera. Failure to do so can cause paper misfeeds or jams and can damage the printer dock.

Previous Next