Kodak EasyShare printer dock 4000 — User's Guide


Table of Contents > Using the Printer Dock with a Computer > Installing the Software

4 Using the Printer Dock with a Computer

Installing the Software


CAUTION:
Do not install the Kodak EasyShare printer dock software with the printer dock connected to the computer. It may cause the software to load incorrectly. If the printer dock is connected, disconnect it before you proceed.
NOTE: For more information on the software applications included on the Kodak EasyShare software CD, click the Help button in the Kodak EasyShare software. Computers with Windows 2000, Windows XP or Mac OS X operating systems need administrator privileges to install the software. See your computer user's guide.

  1. Before you begin, close all software applications that are open on your computer (including anti-virus software).

  2. Place the Kodak EasyShare software CD into the CD-ROM drive.

  3. Place the Kodak EasyShare printer dock software CD into the CD-ROM drive.

  4. Load the software:

Windows OS-based computer—if the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD.

Mac OS 8.6 or 9.x—on the install window, click Continue.

Mac OS X—double-click the CD icon on the desktop, then click the Install icon.

  5. Follow the on-screen instructions to install the software.

  • Windows OS-based computers—select Complete to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install.

  • Mac OS 8.6 or 9.x—select Easy to automatically install the most commonly used applications.

  • Mac OS X—follow the on-screen instructions.

    NOTE: When prompted, take a few minutes to electronically register your printer dock and software. This lets you receive information regarding software updates and registers some of the products included with the printer dock. You must be connected to your Internet service provider to register electronically.

To register later, see www.kodak.com/go/register.

  6. If prompted, restart the computer. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details.

Uninstalling

On a Windows OS-based computer:

  1. From the Start menu, select Settings, then select Control Panel.

  2. Double-click Add/Remove Programs.

  3. Select the Kodak EasyShare printer dock, then click Remove. Follow the on-screen instructions. If prompted, restart the computer.

  4. From the Start menu, select Settings, then select Printers.

  5. Right-click the Kodak PD4000 printer icon, then select Delete.

  6. Follow the on-screen instructions. For Windows 2000 or Windows XP operating systems, continue with the next step. Otherwise stop here.

  7. From the Start menu, select Settings, then select Printers.

  8. Select Server Properties from the File menu, then click the Drivers tab.

  9. Select Kodak PD4000, then click Remove.

  10. Click OK when complete.

On Mac OS X:

  1. Double-click the operating drive for your system.

  2. Select Library, then select Printers.

  3. Open the Kodak folder, then double-click Kodak PD Uninstaller. Follow the on-screen instructions.



Previous Next