Kodak EasyShare CX4310 digital camera — User's Guide

Table of Contents > Connecting to the Computer > Connecting to the Computer

---

7 Connecting to the Computer

Connecting to the Computer

You can transfer your pictures from the camera to the computer using either the camera alone or the optional Kodak EasyShare camera dock or camera dock II. See Connecting the Camera Dock for connecting with a camera dock.

Transferring Pictures With the USB Cable

		1. Turn off the camera.
		2. Plug the labeled ( ) end of the USB cable into the labeled USB port on your computer. See your computer User's Guide for details.
		3. Plug the other end of the USB cable into the labeled USB port on the camera.
		4. Turn on the camera to begin transferring. Kodak EasyShare software opens on your computer and prompts you through the transfer process.

An optional AC adapter is available for your camera; it saves battery power when transferring pictures (see Optional AC Adapter).

NOTE:

You can also use a Kodak multi-card reader or Kodak SD multimedia card reader-writer to transfer your pictures. See a dealer of Kodak products or visit our Web site at http://www.kodak.com/go/cx4310accessories.

Previous Next