Kodak EasyShare CX7220 zoom digital camera — User's Guide


Table of Contents > Getting started > Storing pictures and videos on an SD/MMC card

1 Getting started

Storing pictures and videos on an SD/MMC card

Your camera has 16 MB of internal memory. You can purchase optional SD/MMC cards for removable, reusable storage for pictures and videos.

CAUTION:
Insert card as shown. Forcing it may damage the camera or card. Do not insert or remove a card when the green ready light is blinking; doing so may damage your pictures, card, or camera.

To insert an SD/MMC card:
  1. Turn off the camera and open the card door.

  2. Orient the card as shown.

  3. Push the card into the slot to seat the connector and close the card door.

  • To remove the card, turn off the camera. Push the card in, then release it. When the card is partially ejected, pull it out.

NOTE: When using a card for the first time, we suggest you format it before you take pictures (see ).

To set the image storage location, see . For SD/MMC card storage capacities, see Image storage capacities.

Purchase SD/MMC cards and other accessories at a dealer of Kodak products, or visit www.kodak.com/go/cx7220accessories.



Previous Next