Kodak EasyShare CX7220 zoom digital camera — User's Guide


Table of Contents > Reviewing pictures and videos > Running a slide show

3 Reviewing pictures and videos

Running a slide show

Use the Slide Show to display your pictures and videos on the camera screen. To run a slide show on a television or on any external device, see Displaying pictures and videos on a television. To save battery power, use an optional Kodak 3-volt AC adapter. Purchase this and other accessories at a dealer of Kodak products, or visit www.kodak.com/go/cx7220accessories.

Starting the slide show

  1. Press the Review button, then press the Menu button.

  2. Press to highlight Slide Show , then press the OK button.

  3. Highlight Begin Show, then press the OK button.

    Each picture and video appears once, in the order in which you took them.

  4. To interrupt the Slide Show, press the OK button.

Changing the slide show display interval

The default interval setting displays each picture for 5 seconds. You can increase the display interval to up to 60 seconds.

  1. On the Slide Show menu, press to highlight Interval, then press the OK button.

  2. Select a display interval. To scroll through the seconds quickly, press and hold .

  3. Press the OK button.

    This setting remains until you change it.

Running a continuous slide show loop

When you turn on Loop, the slide show is continuously repeated.

  1. On the Slide Show menu, press to highlight Loop, then press the OK button.

  2. Highlight On, then press the OK button.

    The next time you run a slide show, it repeats until you press the OK button or until battery power is exhausted. This setting remains until you change it.



Previous Next