Kodak EasyShare printer dock — User's Guide

Table of Contents > Using the printer dock with a computer > Transferring pictures from your Kodak EasyShare digital camera

---

5 Using the printer dock with a computer

Transferring pictures from your Kodak EasyShare digital camera

1. Make sure Kodak EasyShare software is installed (see Installing the software) and the printer dock is connected to your computer (see Connecting to a computer).

2. If you have the optional USB card reader, disconnect it from the printer dock.

3. Place the camera in the printer dock (see Docking and charging your EasyShare digital camera).

4. Press the Transfer button, , on the printer dock.

   Kodak EasyShare software opens on your computer (if it is installed).
   
   

5. Use Kodak EasyShare software to transfer pictures from the printer dock to your computer. See the Kodak EasyShare software Help for details.

   The printer dock Transfer light blinks green while the pictures are being transferred. The Transfer light continues to blink green until the Transfer or Print button is pressed, the camera is removed from the printer dock, or the camera automatically powers-off.
   
   

   NOTE:

   If Kodak EasyShare software is not installed (or not active), but the printer driver is installed, pressing the Transfer button creates a new drive connection between the docked camera and the computer. You can copy pictures from the newly established camera drive to your computer hard drive, and otherwise manage files as you would with other drives on your computer. See your computer documentation for details.

   
   

Previous Next