Kodak EasyShare LS753 zoom digital camera — User's guide


Table of Contents > Taking pictures and videos > Putting yourself in the picture

2 Taking pictures and videos

Putting yourself in the picture

Use the Self-Timer to create a 10-second delay between the time you press the Shutter button and the time the picture or video is taken.

  1. Place the camera on a flat surface or tripod.

  2. In any Still mode, press the Menu button.

  3. Highlight Self-Timer , then press the OK button.

  4. Press to highlight On, then press the OK button.

  5. Compose the scene. Then press the Shutter button halfway and hold to set the exposure and focus, then press completely down . Move so that you are in the scene.

    The Self-Timer light on the front of the camera blinks slowly for 8 seconds (then quickly for 2 seconds) before the picture is taken.

    The Ready light blinks for 10 seconds, then turns off during capture.

    The Self-Timer turns off after you take the picture or if you change modes.



Previous Next