Kodak EasyShare CX7530 zoom digital camera — User's guide
Table of Contents > Transferring and printing pictures > Direct printing with a PictBridge-enabled printer
6 Transferring and printing pictures
Direct printing with a PictBridge-enabled printer
Your camera features PictBridge technology, so you can print directly to PictBridge-enabled printers.
Preparing the camera and printer
To get started, you need:
|
|
IMPORTANT: | Do not use the AC adapter included with the Kodak EasyShare camera dock or printer dock to power your camera. |
Connect the camera to the printer
-
Turn off the camera and printer.
-
Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug it into the camera and into an electrical outlet.
-
Using the USB cable that came with your camera, connect the camera to the printer. (See your printer user guide for details.)
Printing pictures
-
Turn on the printer. Turn the camera Mode dial to Auto.
The PictBridge logo and current picture are displayed. (If you turned the Mode dial to Favorites, the current favorite picture is displayed.) If the menu interface turns off, press any button to redisplay it.
-
Press
to choose a printing option, then press the OK button.
Current Picture
Print the current picture. Press
to choose a different picture. Choose the number of pictures to print.
Tagged Pictures
If your printer is capable, print pictures that you tagged for printing (see Tagging pictures for printing) and choose a print size.
Index Print
Print thumbnails of all pictures. This requires one or more sheets of paper. If the printer is capable, choose a print size.
All Pictures
Print all pictures in internal memory, on a card, or in Favorites. Choose the number of pictures to print.
Image Storage
Access internal memory, a card, or Favorites.
IMPORTANT: | During direct printing, pictures are not permanently transferred or saved to the computer or printer. To transfer pictures to your computer, see Transferring and printing pictures. |
Disconnecting the camera from the printer
-
Turn off the camera and printer.
-
Disconnect the USB cable from the camera and the printer.
Previous Next