Kodak EasyShare photo printer 300 — User's Guide


Table of Contents > Getting started > Loading the paper

1 Getting started

Loading the paper

  1. Remove the paper tray from the photo printer if installed (see Installing and removing the paper tray).


  2. Slide the paper tray cover back until it "clicks" into place, about 1.25 in. (3 cm), then lift up on the end of the paper tray cover.


  3. Carefully "fan" the paper to keep the sheets from sticking together.

IMPORTANT: Do not load more than 25 sheets of paper. Use the upper limit line inside the paper tray as a guide to prevent overloading. Do not load paper that is missing perforated tabs. To avoid fingerprints, do not touch the glossy side of the paper.


  4. Load the paper into the paper tray, with the Kodak logo side facing down.

  5. Close the paper tray cover.

Purchase Kodak color cartridge & paper kits and other accessories at a retailer of Kodak products, or visit www.kodak.com/go/accessories.



Previous Next