Kodak EasyShare Z7590 zoom digital camera — User's guide

Power ring does not turn on and the camera does not work.

• Turn on the camera.

• Recharge the battery or install a new one (Inserting the battery).

• Turn Mode dial off, then back on.

Power ring glows steady green.

• Camera is on and ready to take a picture or video.

Power ring glows steady amber.

• Camera is in Favorite mode.

• Camera firmware update is in process.

• Camera is connected to computer, USB connection is active.

• Date and time set with lens retracted.

Power ring blinks green.

• Camera turned off while picture is being processed and saved. Camera operating normally. Processing is completed before power off.

• Do not remove the card while the light is blinking.

• Camera operating normally at power up. Take pictures when the blinking stops.

• Camera operating normally during connect mode to computer.

Power ring blinks amber.

• Battery is low or exhausted. Recharge the battery (Charging the battery).

• Internal camera temperature is too high. Turn the camera off for several minutes; then turn it back on. If the condition continues, get help (Telephone customer support).