Kodak EasyShare Z760 zoom digital camera — User's guide
Table of Contents > Troubleshooting > Camera ready light status
7 Troubleshooting
Camera ready light status
Status | Cause |
---|---|
Ready light glows steady green. |
Shutter button is pressed halfway down. Focus and exposure are set. |
Ready light blinks green. |
Picture is being processed and saved to the camera. |
Pictures are being transferred to computer; camera is connected. |
|
Camera firmware upgrade is in process. |
|
Ready light glows steady orange. |
Camera is in Favorites mode. |
Ready light blinks orange. |
Flash is not charged. Wait. Resume picture taking when the light stops blinking and turns off. |
Auto-exposure or auto-focus is not locked. Release the Shutter button and recompose the picture. |
|
Ready light blinks red and camera turns off. |
Battery is low or exhausted. Recharge the battery (Charging the battery). |
Ready light glows steady red.
|
Camera's internal memory or card is full. Transfer pictures to the computer (Transferring and printing pictures), delete pictures from the camera (Deleting pictures and videos), switch storage locations (), or insert a card with available memory (Storing pictures on an SD or MMC card). |
Camera processing memory is full. Wait. Resume picture taking when the light turns green. |
|
Card is read-only. Change image storage location to internal memory (), or use a different card. |
|
Memory card speed is slow. Card cannot be used to take videos. Change storage location to internal memory (). Use this card to take pictures only. |
Previous Next