Kodak EasyShare photo printer 500 — User's Guide
Table of Contents > Doing more with your printer > Reducing red-eye in your pictures
3 Doing more with your printer
Reducing red-eye in your pictures
The EasyShare photo printer 500 automatically detects red-eye in your subjects and lets you correct your prints with the touch of a button.
NOTE: | Turning on the red-eye reduction feature may result in longer printing times. |
To reduce red-eye in printed pictures:
-
Press the Red-Eye Reduction button before pressing the Print button.
Red-eye reduction is applied to any pictures that were taken using the camera flash.
To turn red-eye reduction to always on:
-
Press and hold the Red-Eye Reduction button for 5 seconds.
The Red-eye Reduction light blinks, then glows steady.
Repeat to turn the default to always off.
NOTE: | The Red-eye Reduction button is disabled when printing from a computer. If printing from a computer, use EasyShare software. Print time may increase slightly when using red-eye reduction. |
Previous Next