Kodak EasyShare printer dock plus series 3 — User's Guide
Table of Contents >
Troubleshooting > Wireless network connection
8 Troubleshooting
Problem
|
Cause and/or solution
|
Printer dock cannot connect to the Wi-Fi wireless network
|
-
A Kodak Wi-Fi card is not inserted or is not fully inserted. Reinsert the Wi-Fi card (Printing and transferring over a Wi-Fi wireless network).
-
Check the power connections (Connecting the power).
-
Make sure the wireless router and network are running before the printer dock begins scanning for a network.
-
Out of range of the Wi-Fi signal. Make sure the printer dock is located within the operating range of the Wi-Fi wireless network.
-
The printer dock network settings are incorrect. Using the Wi-Fi wireless configuration utility on your computer, change the settings to match those of the network.
See the Wi-Fi wireless configuration utility help for details.
-
There is interference in the wireless signal (such as a microwave oven). Wait until there is no interference, then try again.
|
Previous
Next