Kodak EasyShare G600 printer dock — User's guide
Table of Contents > Printing without a computer > Reducing red eye in your prints
3 Printing without a computer
Reducing red eye in your prints
Your printer dock incorporates technology that automatically detects and corrects red eye in your subjects before you print your pictures.
-
Your printer dock defaults to red-eye reduction being always on, and the Red-eye reduction button/light, , glows green.
-
Red-eye reduction is applied to images that were captured using the flash on your digital camera.
-
The Red-eye reduction button is disabled when printing from a computer. If printing from a computer (see Printing from a computer), make sure Kodak EasyShare software is installed on the computer.
-
Printing may slightly increase when using red-eye reduction.
-
Your printer dock may apply red-eye reduction to an area such as a sunburn, which darkens the area in your print. Turn off red-eye reduction.
To turn red-eye reduction off, press the Red-eye reduction button, .
To change the red-eye reduction default to off, press and hold the Red-eye reduction button, , for 5 seconds.
-
The Red-eye-reduction light blinks, then turns off.
Previous Next