Kodak EasyShare C533/C503 zoom digital camera — User's guide
Table of Contents > Taking pictures and videos > Taking a picture
2 Taking pictures and videos
Taking a picture
![](/support/jpg/en/manuals/GLB_en_urg_00560_images/autourg00560002ID1721043.jpg)
Taking a video
![](/support/jpg/en/manuals/GLB_en_urg_00560_images/autourg00560002ID1688396.jpg)
Reviewing the picture or video just taken
After you take a picture or video, the LCD displays a quickview for approximately 5 seconds.
![](/support/jpg/en/manuals/GLB_en_urg_00560_images/autourg00560002ID1691638.jpg)
To review pictures and videos anytime, see Reviewing pictures and videos on your camera.
Understanding picture-taking icons
In capture mode—no buttons pressed
![](/support/jpg/en/manuals/GLB_en_urg_00560_images/autourg00560002ID1669176.jpg)
In capture mode—shutter pressed halfway
![](/support/jpg/en/manuals/GLB_en_urg_00560_images/autourg00560002ID1577879.jpg)
Using the auto-focus framing marks (to take pictures)
When using the LCD as a viewfinder, framing marks indicate the camera focus area. The camera attempts to focus on foreground subjects, even if the subjects are not centered in the scene.
-
Press the Shutter button halfway.
When the framing marks turn green, focus is accomplished.
Center focus
Center wide focus
Side focus
Center and side focus
Left and right focus
-
If the camera is not focusing on the desired subject (or if the framing marks disappear), release the Shutter button, recompose the scene, and repeat step 1.
-
Press the Shutter button completely down to take the picture.
NOTE: | Framing marks do not appear in Landscape or Video mode. When you use Focus Zone (see ) and set Center Zone, the framing marks are fixed at Center Wide. |
Previous Next