Kodak EasyShare Z710 zoom digital camera — User's guide


Table of Contents > Taking pictures/videos > Taking a picture

2 Taking pictures/videos

Taking a picture

NOTE: After you take a picture, the EVF/LCD displays a quickview for approximately 5 seconds. The picture is saved unless you press the Delete button.

Using the auto-focus framing marks (pictures)

When using the LCD or EVF as a viewfinder, framing marks indicate the camera focus area. The camera attempts to focus on foreground subjects, even if the subjects are not centered in the scene.

  1. Press the Shutter button halfway.

    When the framing marks turn green, focus is accomplished.

    While the shutter button is pressed halfway:

    Center focus

    Center wide focus

    Side focus

    Center/side focus

    Left/right focus

  2. If the camera is not focusing on the desired subject (or if the framing marks disappear), release the Shutter button and recompose the scene.

  3. Press the Shutter button completely down to take the picture.

NOTE: Framing marks do not appear in all modes. When you use Focus Zone and set Center Zone, the framing marks are fixed at Center Wide.

Taking a video

NOTE: After you take a video, the EVF/LCD displays a quickview for approximately 5 seconds. To play/pause the video during the quickview, press the OK button. The video is saved unless you press the Delete button.



Previous Next